A8-AF, A8-AF Finna sensor, MRC006507, Máy đo độ ẩm MRC006507, Đại lý Finna sensor Việt Nam

A large proportion of repairs needed for aircraft radomes can be attributed to moisture ingression caused by issues such as static discharge or erosion. If not checked properly, water will begin to collect in the honeycomb cells and go through a freeze/thaw cycle. Through a repeated process of the ice expanding, delamination and core disintegration, damage is dealt to surrounding cells. The result of this can be the aircraft getting a false reading on storm cells on the radar scope or, inversely, the radar being misdirected and the pilot misses a storm in front of them. Approved by the U.S. Air Force and trusted by airlines globally, the A8-AF: Radome Moisture Meter is a proven, reliable way to detect these pockets of moisture.

The Model A8-AF radome moisture meter consists of two basic components: the electrode sensor and the metering unit. These components are connected by a 2’8″ cable attached with interchangeable push-in connectors. The separate electrode sensor permits testing in remote areas, and the simple operating procedures allow the Model A8-AF to be used by both technical and non-technical operators.

Equipped with a special direct reading, and a colored comparator scale calibrated for radomes, the Model A8-AF provides quantitative readings of Good, Fair, Poor, or Unacceptable radomes. The meter also has a low battery charge indication in the form of meter zero drift.

The Model A8-AF radome moisture meter is a direct replacement for the Model AFK2D which was the accepted instrument for many years in the aircraft industry for measuring moisture content of radomes.

Key Features:

• The Model A8-AF Radome Moisture Meter indicates the moisture pockets in aircraft radomes by measuring the radio frequency dielectric power loss of material in contact with the electrode sensor. The RF power loss absorption principle is a patented feature of all Finna Group products.
• Direct reading, colored comparator scale for instantaneous indication of moisture
• Spring-loaded electrode buttons allow nondestructive testing of irregular or curved surfaces
• Comes with electrode, rechargeable batteries, battery charger, carrying case and operating instructions
• Completely tested and approved by the United States Air Force