Fill Pass‍ Diverter VORTEX GLOBAL, Van chia hướng Fill Pass‍ Diverter VORTEX GLOBAL Việt Nam, LTĐ Đại lý phân phối VORTEX GLOBAL tại VietNam

Key Features

• Shimming system for in-line maintenance

• The diverter’s spread stack offers better separation of air and materials

• Material deflector to direct material flow and minimize material carryover

• Machined, full-bore orifices for unobstructed material flow and to maintain convey line pressures

• Double-acting air cylinder provides instant response to actuation commands, for accurate scaling into hoppers

• “Scissoring” action reduces seal wear and minimizes material shearing

• Seals off the closed port(s) for a positive material shut-off

• Positive seal of materials/dust-tight seal across the closed line(s) and to atmosphere

• No pinch points or exposed moving parts

***Model No. DXX

• Conveyance Type Dilute phase pneumatic conveying applications. Can handle dierential pressures up to 15 psig | 1 barg | 0.1 MPa, depending on gate size. Can be used in pressure or vacuum systems.
• Materials Handled Non-abrasive to moderately abrasive powders, pellets and granules. Modifications available for handling corrosive materials and/or for wash-down.
• Standard Sizes 2 – 6 in | 50 – 150 mm
• ID & OD diameters are available. Schedule pipe sizes are also available.
• Inlet & Outlets Available in round sizes.
• Overall Height 7 – 13 in | 90 – 165 mm
• Weight 60 – 115 lb | 25 – 50 kg
• "Fill" Angle Options 30° or 45° from center
• Contact us for custom angles
• Connection Options Compression couplings
• Material Temperatures 180° F | 80° C for standard gate, with modifications that allow up to 400° F | 205° C
• Body/Frame Options Aluminum
• Weldment Options 304 or 316L stainless steel
• Material Contact Options 304 or 316L stainless steel